One Channel Wireless Receiver Controller For Doors

Wireless Receiver Controller
Voltage: 12V/24V optional
Frequency: 433.92+ -1MHz
Encoder: HCS301
Channel: one channel

Wireless Receiver Controller

Voltage: 12V/24V optional

Frequency: 433.92±1MHz

Encoder: HCS301

Channel:  one channel

Feature:

Application domain:  it’s used for alarm, gate opener and electric motor etc.

Remote storage: it can learn about 100 remote controls.If the receiver receive the same factory code of remote control during not learn the code state, the learning LED will flash to indicate. Which means the remote control can be learnt by this receiver.Monostable/bistable optional

 

Working instruction:

Learning code:

    Monostable:press the learning button on PCB once, LED will flash once to light to enter into learning state, when the remote control is learnt successfully, the LED will be off.  If the remote control is not learnt within 5s, the LED will be off to exit learning mode.

 

    Bistable: press the learning button on PCB twice, LED will flash twice to light to enter into learning state, when the remote control is learnt successfully, the LED will be off.  If the remote control is not learnt within 5s, the LED will be off to exit learning mode.

 

Removing code:

Press learning button about 10s, learning LED will flash 5 times then go off, which means all the codes are removed successfully.