Giant Alarm System Co., Ltd.

RF Controller System With Voltage DC/AC 12V 24V

RF Controller System With Voltage DC/AC 12V 24V
Product Detailed

RF Controller System
Voltage: DC/AC 12V 24V
Frequency: 433.92MHZ
Modulation: ASK
Decoder: HCS301 rolling code

RF Controller System

Voltage: DC/AC  12V 24V

Frequency: 433.92MHZ±0.5

Modulation: ASK

Decoder:HCS301 ROLLING CODE

CONNECTION:

J1: electrical source input

J2:channel 2, lock option, it’s in lock state when short circuit(defaulted)

J3:Learning button, short press it(Note: you can only learn one remote by one press.) and LED2 lights, twice press the original remote,LED2 extinct,

Learning code succeeds. Remove original code: press J3 for 8 seconds and then release, LED 2 flashes 4 times, this is indicates the code has been removed.

LED1: state indicator, it’ll light when receiving same signal or same signal or same manufacture code.

1N1/OUT1: input and output of channel1.

1N2/OUT2: input and output of channel 2.

Antenna: in order to receiver better signal, please pull out the antenna, and keep at least 5cm away  from metal object.

OPERATION:

Short press the first button of the remote, the first channel of the receiver will transmit signals for one second; if you keep pressing the button, the receiver will keep transmitting signals until you release the button.A. When J2 is in unlock state: short press the second button of the remote, the second.

Channel of the receiver will transmit signals for one second , if you keep pressing the button,.

   The receiver will keep transmitting signals until you release the button.

   B. When J2 is in lock state(short circuit) : short press the second button of the remote, the second channel of the receiver will keep transmitting signals; short press again to stop it.



Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.