Giant Alarm System Co., Ltd.

DC12V 4 channels RF Receiver Board

DC12V 4 channels RF Receiver Board
Product Detailed

Rf Receiver Board,it can control all mechanical equipments,also it can use the remote control to control.

 
Product nameGate opener
Model No.JJ-JS-083
Receiver Modesuperheterodyne
ParameterspecificationUnitCondition
 MinTypMax  
Frequency×433.92434.12MHz 
Receiver Sensitivity  -112dBm 
Data Rate0.058 12Kbaud 
Supply Voltage.VDD101224VDC
Current 5.85.95.9mA 
Operating Temperature -40 +65°C 
      
Product nameGate opener
Model No.JJ-JS-083
Receiver Modesuperregeneration
ParameterspecificationUnitCondition
 MinTypMax  
Frequency433.42433.92434.22MHz 
Receiver Sensitivity  -112dBm 
Data Rate   Kbaud 
Supply Voltage.VDD101214VDC
Current 88.28.3mA 
Operating Temperature -10 +65°C 
      
POWER: DC12V-24V

OUTPUT CURRENT: 5~7A on the relay

FREQUENCY: 433.9MHZ

MODE: ASK

OUTPUT INSTRUCTION

When you press the button, the relay is ON, when you release the button, the relay is OFF. The other button has same function.

 

HOW TO EXCHANGE BETWEEN MONOSTABILITY AND BISTABILITY:

Long press D1 and D3 to exchange.

HOW TO LEARN CODE:

   Short press SW-SPST on PCB and release, learning LED will light, now short press the button of remote in 5 seconds, LED off and the code is learned. Learn moreremotes by repeating the above operation. You can learn 30 remotes with EV1527 /PT 2240 at most. Note: you can only learn one remote each time.

 

HOW TO ERASE CODE

 

Long press SW-SPST on PCB and release, learning LED flashes 4 times and OFF, the code is erased. All the code will be erased by this operation. Note: learning LED is the small one on PCB.



Copyright Notice @ 2008-2013 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.