- Other Auto Electrical Systems[1]
- Speaker & Horn[1]
- Central Locking System[1]
- Other Motorcycle Accessories[10]
- Other Motorcycle Electrical Systems[2]
- Other Motorcycle Parts[9]
- Automatic Door Operators[9]
- Garage Door Openers[8]
- Gate Operators[10]
- Digital Batteries[1]
- Remote Control[10]
- Speakers[1]
- Other Consumer Electronics[1]
- Remote Control Switches[1]
- Other Electronic Components[1]
- Double-Sided PCB[2]
- Multilayer PCB[1]
- Other PCB & PCBA[9]
- Single-Sided PCB[4]
- Curtain Poles[1]
- Other Home Appliance Parts[1]
- Ballasts[1]
- Other Motor[2]
- Magnetic Materials[1]
- Access Control System[10]
- Alarm[2]
- Key[1]
- Locks[1]
- Repeater[1]
433.92MHZ or 315MHZ,Host of remote controller
Host of remote controller is used for electric doors, window,lifting appliance, industrial controls, alarm system etc.
Host of remote controller
1.Features:
Nice-looking case is more commercioganic.
With rolling code lead to much higher and
Input voltage: 12VDC or 220VAC ( optional)
2. :
Range of application: used for electric doors, window,lifting appliance, industrial controls, alarm system etc. When the receiver work with the remote control, which can make a complete set of wireless intelligent control system.
3.
IDDQ: 6ma
Working Voltage: 220V/AC 12V/AC/DC (optional)
Receiving Frequency: 433.92MHZ, 315MHZ ( customized)
Sensitivity: -107dB
Encoder: HCS301
Code: rolling code
Decoder: Monostable (optional)
Contact Current: 5A 240VAC/5A 24VDC
Contact : N.O. or N.C. ( optional)
Demension: 75mm*276mm*37mm with antenna
Working Temperature: -40+80
Momery capacity: 100 codes
4.Function
LED:
green light--- power indecation
Red light ---- learning code indecation (when the manufacture code for the remote control and receiver are same also flash)
Learning code:
SW1: learning button of Monostable
SW2: learning button of Bistable
1Monostable: if you learn 1st relay, press SW1 once, in the same way, press SW1 twice for 2nd relay, press SW1 3 times for the 3rd reply, press SW1 4 times for the 4th relay, when red Led flash once which means ready to learn code, if not receive the signal in 5s, the red Led is off automatically which exit learning code mode .
2Bistable if you learn 1st relay, press SW2 once, in the same way, press SW2 twice for 2nd relay, press SW2 3 times for the 3rd reply, press SW2 4 times for the 4th relay, when red Led flash once which means ready to learn code, if not receive the signal in 5s, the red Led is off automatically which exit learning code mode .
3Remove code: long press SW1 or SW2 for 5s, when the red LED flash then turn off, which means remove the code successfully
Note: if remove the code careless, the unit system cant resume it.
5. Product Picture Antenna Socket Red LED Green led